Setting Up; Fitting The Chart; Fitting The Pen Capsule(S) - ABB C1900 Operating Instructions Manual

3 SETTING UP

3.1 Fitting the Chart – Fig. 3.1
Rotate chart to align the
5
time line with the red pen
(see also IM/C1900-OGR Fig. 2.1
or
6
Fig. 3.1 Fitting the Chart
6
1 Raise pens
Lift the chart clamp
2
and remove the chart
Fit new chart ensuring
3
that it is beneath the
pen lifter bars
Locate chart
4
under guides
IM/C1900-OGC Fig. 2.1)
Lower the chart clamp and press
down firmly to ensure that the 2
locating pins pierce the paper
3.2 Fitting the Pen Capsule(s) – Fig. 3.2
3
Remove spent
capsule
Lifter bars
6
Ensure that the arm
is positioned above
its lifter bar
Fig. 3.2 Fitting the Pen Capsules
1
Raise pens
Gently pull the arm
2
off the bracket
Caution.
Take care not to
bend the arms
during removal and
re-fitting as pen
clashing may result.
4
Fit new pen capsule
ensuring that the arm
locates in the pen
capsule slot
5
Remove cap
Slide pen assembly
7
onto the appropriate
bracket until it
clips into place.