Process View - ABB SM1000 User Manual

2.6 Process View – Fig. 2.6
Note. The Process view is available only if the Totalizer option is fitted.
Totalizer not enabled
in configuration level
Totalizer
Tag Name
Totalizer
Value
Selects the next Process Group
(if enabled) or the Status View
Selects the next enabled view
(Bargraph, Digital Indicator or Chart)
For a description of the Status Icons (displayed in the Status Bar) and Alarm Event Icons
(displayed in the Bargraph, Digital Indicators, Process and Chart Views), refer to the Rear Foldout.
Notes.
• Only totalizers that have been configured and enabled in the Configuration level are displayed.
• When a totalizer is not running (i.e. 'Stop' is selected), the corresponding totalizer value is shown in red.
Global Alarm Status Icon
Alarm Tag
Process Group 1
Tank 1 Low Level
Tank 1 High Level
Tank 1 Low Pressure
Tank 1 High Pressure
Total Daily In Flow
Low In Flow Rate
0005402801
High In Flow Rate
litres
Total Daily Out Flow
0005402060
High Out Flow Rate
litres
Tank 1 Low Temp
Tank 1 High Temp
Opens the Operator Menu for
the current view
A – Process View (Alarms)
Total Daily In Flow
Storage Tank 1 In Flow
0005402801
225.4
litres
Max
Values since last totalizer reset or totalizer wrap. Calculated only while
the totalizer is enabled. Updated only while the totalizer is running.
B – Process View (Statistics)
Fig. 2.6 Process View
Alarm Trip Level
28/03/00
14:52:00
Level
1.25
2.08
4.75
metres
Pressure
0.25
4
4.75
bar
In Flow
40
204.9
280
l/hr
Out Flow
198.9
250
l/hr
Temp
150
195
200
°C
Alarm 1
On
Channel Source Long Tag
In Flow
204.9
110.9 201.0
l/hr
Min Average
2 OPERATION...
Alarm Acknowledged
Short Channel Tag
Instantaneous Value
Alarm Status
15