ABB SM1000 User Manual page 71

Inform it videographic recorder

Hide thumbs Also See for SM1000:

Table of Contents

4 CONFIGURATION...

...4.6.4 Alarm Configuration

Select an alarm Enable source. When the 'Enable source' is

active, the alarm is enabled. When the source is inactive the

alarm is disabled. If set to 'None' the alarm is always

enabled.

Note. For

Delayed

Process

alarm

operation,

see

Fig. 4.16.

Set to 'On' to record all changes in the alarm state in the

Alarm Event log – see Section 2.7.

Assign the alarm to one or more of 12 groups.

The alarm states assigned to each group are 'ORed'

together to create an internal digital signal that may be

assigned to relays, digital outputs or internal digital controls.

Table of Contents