GE N60 Instruction Manual page 91
Network stability and synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (460 pages)
Table of Contents
Advertisement
CHAPTER 3: INSTALLATION
2.
Right-click the Local Area Connection icon and select Properties.
3.
Select the Internet Protocol (TCP/IP) item from the list, and click the Properties button.
4.
Click the "Use the following IP address" box.
5.
Enter an IP address with the first three numbers the same as the IP address of the N60 relay and the last number
different (in this example, 1.1.1.2).
6.
Enter a subnet mask equal to the one set in the N60 (in this example, 255.0.0.0).
7.
Click the OK button to save the values.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
ADD DEVICE TO SOFTWARE
3-47
3
Advertisement
Table of Contents
