Xilinx KCU105 User Manual page 25

4. Navigate to the folder where the reference design is copied:
cd <dir>\kcu105_control_plane
5. Run the batch script quickstart_win7.bat:
quickstart_win7.bat
6. The screen in
the reference design. This step takes you to the Control and Monitoring GUI as shown in
Figure 3-12, page
X-Ref Target - Figure 3-11
PCI Express Control Plane TRD
UG918 (v2017.2) July 18, 2017
Figure 3-11 shows the TRD Setup screen of the GUI. Click Proceed to test
26.
Figure 3-11: GUI - TRD Setup Screen
www.xilinx.com
Chapter 3: Bringing Up the Design
UG918_c3-13_040715
Send Feedback
25