ABB SM2000 User Manual page 23

Advanced Videographic Recorder
SM2000
IM/SM2000 Issue 11
Select the Configuration Level – see Section 4, page 45.
Select the Setup Level – see Section 3, page 29.
Switch between the Alarm View and the Statistics View.
Note. If a channel's totalizer is not enabled in the Configuration level, Alarm trip levels
are shown in place of the channel statistics. If no alarms are enabled, the long tag for that
channel is displayed.
Add one of 24 predefined Operator Messages (see Section 4.4.7, page 60) or one User-
Defined Message to the alarm event log.
If '< user defined >' is selected, a data entry keyboard appears to enable the message to
be entered (see Fig. 4.5, page 50). The selected or user-defined message is displayed
briefly on-screen.
Stop and start individual totalizers.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Note. When a totalizer is not running (i.e. 'Stop' is selected), the corresponding totalizer
value is shown in red.
2 OPERATION
21