Real-Time Alarms - ABB SM2000 User Manual

Advanced Videographic Recorder
SM2000

4.9.2 Real-time Alarms

IM/SM2000 Issue 11
Enter the tag to be used in the Alarm Event log – see
Section 2.7, page 23.
Set the day(s) on which the alarm is activated.
Set to 'On' to activate the real-time alarm on the first day of
each month.
Set the time at which the alarm becomes active.
If 'Every hour' is set to 'On', the 'Hours' setting cannot be
adjusted and the alarm is activated at the same time every hour
(determined by the 'Minutes' setting) or on the hour (if 'Minutes'
is set to 'Off').
Set the duration for the alarm to remain active.
Set to 'On' to add an entry to the Alarm event log each time the
real-time alarm becomes active.
4 CONFIGURATION
99