Electronic Signatures - ABB SM2000 User Manual

Advanced Videographic Recorder
SM2000
2.3.1 Electronic Signatures – Fig. 2.4
Entering an electronic signature is the equivalent to signing the chart of a conventional paper recorder. Local procedures may require
the approval of a record by an authorized signatory; for this reason, an electronic signature is password protected.
Create a new signature
or…
Select one of 7
previously
defined signatures
(see below)
Note
If more than one process group is
enabled (see Section 4.4.1, page 52),
assign the signature to one or more
Fig. 2.4 Entering an Electronic Signature
Note. Up to 7 electronic signatures can be stored in the instrument's memory. If 7 signatures exist and a new one is created, the
oldest is overwritten.
14
groups
Enter Password
(see Section 3.3, page 31)
Create new signature or
edit an existing one.
Electronic signature is entered into alarm log.
If Operator Message annotation is enabled (see Page 11),
the electronic signature is also displayed on the chart.
2 OPERATION
Invalid Password
Entered
(see Note in Fig. 3.2, page 30)
Valid Password
Entered
IM/SM2000 Issue 11