Table of Contents
Advertisement
9. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
the notches
1
on it with the tabs
2
in the microprocessor socket. Then, carefully lower the new
microprocessor straight down into the microprocessor socket.
Note: The small triangle
3
on one corner of the new microprocessor is the microprocessor orientation
indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
4
corner
of the microprocessor socket.
Figure 132. Installing the microprocessor
10. Pivot the microprocessor retainer downward to close the retainer.
Figure 133. Closing the microprocessor retainer
169
.
Chapter 9
Installing or replacing hardware
- Quick Links:
- Hardware Locations
- Parts on the System Board
Hide quick links:
Advertisement
Table of Contents
