5. Grasp the old card that is currently installed and gently pull it out of the slot.
Notes:
• The card fits tightly into the slot. If necessary, alternately move each side of the card a small amount
until the card is removed from the slot.
• If the card is held in place by a retaining latch, press the card retaining latch as shown to disengage
the latch. Then grasp the card and gently pull it out of the slot.
Figure 21. Disengaging the card retaining latch
Figure 22. Removing the full-length PCI Express card
6. Remove the new full-length PCI Express card from its static-protective package.
.
Chapter 9
Installing or replacing hardware
103