Rear Fan Assembly - Lenovo ThinkStation P410 Hardware Maintenance Manual

6. Pull the tips of the rubber mounts until the front fan assembly is secured in place.
Figure 75. Installing the front fan assembly
7. Connect the front fan assembly cable to the power fan connector on the system board.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 174.

Rear fan assembly

Attention: Before you replace any FRU, be sure to read and understand Chapter 1 "Read this first: Important
safety information" on page 1.
To replace the rear fan assembly, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 95.
2. Locate the rear fan assembly. See "Computer components" on page 31.
3. Disconnect the rear fan assembly cable from the system fan connector on the system board. See
"Parts on the system board" on page 34.
.
Chapter 9 Installing or replacing hardware
137