9.4.6
Operation switch name sheet creation
This section describes the operation switch name sheet creation.
■1. Creating the name sheet
Step 1.
Prepare the name sheet board and OHP sheet (transparent and colorless sheet) included in the Handy
GOT.
Step 2.
Write a original switch name for the user on the name sheet board.
Create the name sheet in the following dimensions.
Operation switch (For 6 pieces)
C2
[Examples of creation]
Without partitions
With partitions
Step 3.
Copy the contents of the name sheet board to the OHP sheet in full size (100%) with a copier.
When using another OHP sheet, prepare the following sheet.
In addition, the sheet must be copiable.
• Material: polyester film
• Thickness: 0.1mm
■2. Mounting the name sheet
Step 1.
Insert the operation name sheet to the slit from side.
9 - 16
9.4 Switch Wiring
31
16
19
37.5
19
SW1 Center
SW2 Center
170
108=Range of character arrangement effective
19
19
19
19
19
SW3 Center
SW4 Center
SW5 Center
Operation switch
name sheet
19
(16)
19
(37.5)
SW6 Center