Mitsubishi Electric GOT2000 Series User Manual page 258

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

Set the project data to use the station No. switching.

If [Screen] →[Screen Property] from the menu is selected, the [Screen Property] dialog box is displayed.

Tick the check box of [Switch Station No.] in the [Basic] tab.

Perform this operation in all screens where the station No. is switched.

Place objects on the screen.

Finally, place objects on the screen.

Select [Host] for Network Setting.

When the station No. switching device value is 0, the host is monitored.

Transfer the project data to the GOT and check the operation.

7.1 Connector Conversion Box

Troubleshooting