Installing And Removing The Usb Cable (Gt27, Gt25, Gt23, Gt2107); Installing The Usb Cable; Installing And Removing The Usb Cable - Mitsubishi Electric GOT2000 Series User Manual

6.15 Installing and Removing the USB cable (GT27, GT25, GT23, GT2107)

The following shows the procedure for installing and removing a USB cable to the USB interface on the GOT rear face.
The locations of the USB interface (Host) and the USB interface (Device) vary by model.
6.15.1

Installing the USB cable

Install the USB cable to the GOT in the following procedure.
Attach a cable clamp depending on the usage environment, such as when fixing a cable is difficult.
■1. For GT27, GT25, GT23
Step 1.
Install the USB cable to a USB interface (Host/device) on the GOT rear face.
Step 2.
Insert a cable clamp to the mounting hole for a cable clamp shown in the following figure and push it until
you hear a clicking sound. For the direction that the band goes through, refer to the arrow in the figure.
(Cable clamp used in this example: RSG-130-V0, KITAGAWA INDUSTRIES CO.,LTD.)
Step 3.
Pass the USB cable through a hole of the cable clamp and pull the band to fix the cable.
6.15 Installing and Removing the USB cable (GT27, GT25, GT23, GT2107)
6
6 - 83