Installing And Removing The Usb Devices (Gt27, Gt25, Gt23, Gt2107); Installing The Usb Devices; Installing And Removing The Usb Devices - Mitsubishi Electric GOT2000 Series User Manual

6.14 Installing and Removing the USB Devices (GT27, GT25, GT23, GT2107)

The following shows the procedure for installing and removing a USB device.
6.14.1

Installing the USB devices

■1. For GT27 and GT25 equipped with the USB interface (Host) on the front face
Step 1.
Push the [PUSH] mark on the USB environmental protection cover to open the cover.
Step 2.
Insert the USB interface to the USB interface (Host) as shown below.
Make sure to insert the USB interface connector in the correct direction.
POINT POINT POINT
The following shows the procedure for installing and removing a USB device
When connecting the devices to the USB interface (Host) using USB hub with the GOT power
on, drive assignment of connected USB devices may be changed.To use the USB hub devices,
turn on the GOT with the devices connected.
6.14 Installing and Removing the USB Devices (GT27, GT25, GT23, GT2107)
6
6 - 79