Ethernet Connection; System Configuration For Connecting To Fa-M3/M3V - Mitsubishi Electric GOT1000 Series Connection Manual

7.3 Ethernet Connection

7.3.1

System configuration for connecting to FA-M3/M3V

FA-M3/M3V
PLC
Ethernet
Model
interface
name
*1
module
F3SP05
F3SP08
F3FP36
F3SP21
F3SP25
F3LE01-5T
F3SP35
F3LE11-0T
F3SP28
F3LE12-0T
F3SP38
F3SP53
F3SP58
F3SP59
F3SP76-7S
F3SP71-4S F3LE11-0T
F3SP66
F3SP67
F3SP71-4N -
F3SP76-7S
F3SP71-4S
*1 Product manufactured by YOKOGAWA Electric Corporation. For details of the product, contact Yokogawa Electric Corporation.
*2 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standards.
*3 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*4 When connecting GT16 of the function version A to an equipment that meets the 10BASE (-T/2/5) standard, use the switching
hub and operate in a 10Mbps/100Mbps mixed environment.
For how to check the function version, refer to the following.
*5 GT14 models compatible with Ethernet connection are only GT1455-QTBDE, GT1450-QMBDE and GT1450-QLBDE.
7 - 16
7. CONNECTION TO YOKOGAWA PLC
7.3 Ethernet Connection
PC link
module
Connection cable
Connection cable
*2
Cable model
Connection diagram number
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) :
Category 3, 4, and 5
• 100BASE-TX
Shielded twisted pair cable (STP) :
Category 5 and 5e
GT16 User's Manual
GOT
GOT
Maximum
segment
Option device
*3
length
- (Built into GOT)
100m
GT15-J71E71-100
Communication driver
Ethernet( YOKOGAWA
Number of connectable
equipment
*4
Model
*5
When PLC:GOT is N:1
The following shows the
number of PLCs for 1 GOT
<For GT16, GT14>
TCP: 128 or less
UDP: 128 or less
<For GT15, GT12>
TCP: 10 or less
UDP: 128 or less
When PLC:GOT is 1:N
The following shows the
number of GOTs for 1 PLC
TCP: 8 or less
UDP: 128 or less
(recommended to 16 or less)
), Gateway