Ethernet Connection With Fxcpu - Mitsubishi Electric GOT 1000 Connection Manual

ETHERNET
CONNECTION
WITH FXCPU
2.1 System Configuration . . . . . . . . . . page 2-2
This section describes devices and cables required for the
Ethernet connection.
Select a system suitable for the application.
2.2 Preparatory Procedures for Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-4
This section describes the procedures before monitoring
via the Ethernet connection.
The procedures are written in order so that even GOT
beginners can follow the procedures for communications
with the GOT.
2.3 Programmable Controller Settings . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . page 2-23
This section describes the programmable controller
settings for connecting to the GOT.
For checking the programmable controller settings, refer to
this section.
2.4 Precautions . . . . . . . . . . . . . . . . . page 2-29
This section describes the precautions for the Ethernet
connection.
Be sure to refer this section before establishing the
Ethernet connection.
2.5 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . . . page 2-30
This section describes the functions added by version
upgrade of GT Designer2 or OS.
2
1
2
2 - 1