Fuji Pxr/Pxg/Pxh; Precautions - Mitsubishi Electric GOT1000 Series Connection Manual

5.6.1

FUJI PXR/PXG/PXH

Device name
Bit data (0)
*1
Bit data (1)
Word device bit
*1
Word data (3)
Word data (4)
*1 Only reading is possible.

5.7 Precautions


Station number settings of temperature controller
In the system configuration, the temperature controller with the station number set with the host address must be
included. For details of host address setting, refer to the following.
5.4.2 Communication detail settings

FIX processing of temperature controller
The temperature controller power must not be turned off during the FIX processing. Otherwise, data within the non-
volatile memory will corrupt and the temperature controller will be unavailable.

GOT clock control
Since the temperature controller does not have a clock function, the settings of "time adjusting" or "time broad cast"
by GOT clock control will be disabled.

Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device. For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.
GT Designer3 Version1 Screen Design Manual
Setting range
00001 to 00001
10001 to 10016
Specified bit of the following word devices
30001 to 31398
40001 to 43776
5. CONNECTION TO FUJI TEMPERATURE CONTROLLER
Device No. representation
Decimal
―
Decimal
5 - 19
5.7 Precautions
1
2
3
4
5
6
7
8