Plc Side Setting - Mitsubishi Electric GOT1000 Series Connection Manual


Communication detail settings
Make the settings according to the usage environment.
Item Description
Set this item when change the
transmission speed used for
Transmission
communication with the connected
Speed
equipment.
(Default: 9600bps)
Set this item when change the data length
used for communication with the
Data Bit
connected equipment.
(Default: 8bits)
Specify the stop bit length for
Stop Bit communications.
(Default: 1bit)
Specify whether or not to perform a parity
check, and how it is performed during
Parity
communication.
(Default: No)
Set whether or not to perform a sum check
Sum Check during communication.
(Default: Yes)
Set the number of retries to be performed
when a communication timeout occurs.
Retry When receiving no response after retries,
the communication times out.
(Default: 0time)
Set the time period for a communication to
Timeout Time time out.
(Default: 3sec)
Set this item to adjust the transmission
timing of the communication request from
Delay Time
the GOT.
(Default: 0ms)
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
7.2.6
POINT POINT POINT
YOKOGAWA PLC
For details of YOKOGAWA PLCs, refer to the
following manuals.
CPU port/D-Sub 9-pin
conversion cable
SIO port adapter cable
Range
4800bps,
9600bps,
PC link module
19200bps,
38400bps,
57600bps,
115200bps
STARDOM
7bits/8bits
1bit/2bits
None
Even
Odd
Yes or No
0 to 5times
3 to 30sec
0 to 30
( 10ms)
7. CONNECTION TO YOKOGAWA PLC

PLC side setting

YOKOGAWA PLC user's Manual
Model name
KM10-0C
KM10-0S
F3LC01-1N
F3LC11-1N
F3LC11-2N
F3LC11-1F
F3LC12-1F
LC01-0N
LC02-0N
7.2 Serial Connection
1
2
Refer to
7.2.7
3
7.2.8
7.2.9
7.2.10
4
7.2.11
5
6
7
8
7 - 9