Integral Transmitter; Integral Transmitter - Power And Output Signal Connections - ABB Endura AZ30 series Programming Manual

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor

5.4 Integral Transmitter

5.4.1 Integral Transmitter – Power and Output Signal Connections
Warning.

The transmitter must be earthed.

Isolate the incoming mains power supply cable before making connections at the transmitter.
Referring to Fig. 5.6:
1. Unscrew and remove the transmitter rear cover
necessary).
2. Access power supply terminals, by unclipping latch
265 V AC
External Earth
Connection
Fig. 5.6 Access to Power and Output Signal Terminals – Integral Transmitter
26
A
(a lever can be used across the flats if
B
and lifting hinged power supply cover
5 Electrical Installation
C
COI/AZ30E–EN Rev. D
.