Display - ABB Endura AZ30 series Programming Manual

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor

6.4.5 Display

Menu
Display
Exit
Parameter
Language
English
Deutsch
Français
Español
Italiano
Operator Page 1
Display Mode
1 x 4
1 x 6
1 x 6 + Bargraph
2 x 9
2 x 9 + Bargraph
3 x 9
Table 6.10 Display Menu
52
Used to set the Display Mode (lines of information displayed
5
on the Operator Pages), enable or disable Autoscroll, set the
time and date and time and date format, select a Daylight
Saving region and adjust the screen contrast.
Select
Comment / [Range]
Selects the language displayed on the transmitter's
local display.
Specifies the type of information to be displayed on
each (text) line.
Selects the number of lines of information and
maximum number of characters per line displayed on
the selected Operator Page.
Note. The instrument ID tag (if added) is displayed in
the Operator Page except when the 3 x 9 format is
selected.
Displays 1 line with up to 4 characters.
Displays 1 line with up to 6 characters.
Displays 1 line with up to 6 characters, plus bargraph.
Displays 2 lines, each with up to 9 characters.
Displays 2 lines, each with up to 9 characters plus
bargraph.
Displays 3 lines, each with up to 9 characters.
6 Programming
Default
English
1 x 4
COI/AZ30E–EN Rev. D