Restriction Of Hazardous Substances (Rohs); Safety Precautions; Safety Conventions - ABB Endura AZ30 series Programming Manual

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor

1.6 Restriction of Hazardous Substances (RoHS)

The European Union RoHS Directive and subsequent regulations introduced in member
states and other countries limits the use of six hazardous substances used in the
manufacturing of electrical and electronic equipment. Currently, monitoring and control
instruments do not fall within the scope of the RoHS Directive, however ABB has taken
RoHS
the decision to adopt the recommendations in the Directive as the target for all future
product design and component purchasing.

1.7 Safety Precautions

Please read the entire manual before unpacking, setting up, or operating this instrument.
Pay particular attention to all warning and caution statements. Failure to do so could result in serious injury
to the operator or damage to the equipment.
To ensure the protection provided by this equipment is not impaired, do not use or install this equipment in
any manner other than that which is specified in this manual.

1.8 Safety Conventions

Warning. In this manual, a warning is used to indicate a condition which, if not met, could cause serious
personal injury and / or death. Do not move beyond a warning until all conditions have been met.
If a warning sign appears on the instrument itself, refer to Precautionary Labels – UL Certification and
Electrical Safety – CEI / IEC 61010-1:2001-2 for an explanation.
Caution. A caution is used to indicate a condition which, if not met, could cause minor or moderate
personal injury and / or damage to the equipment. Do not move beyond a caution until all conditions
have been met.
Note. A note is used to indicate important information or instructions that should be considered before
operating the equipment.
6
1 Safety
COI/AZ30E–EN Rev. D