ABB 800xA User Manual page 104

Table 8. 800xA Multisystem Integration Error Messages (Continued)
Error Messages
RAC_HAS_BEEN_DELETED
RAS_UNIT_NOT_OPEN
RAC_UNIT_NOT_OPEN
READONLY_CONNECTION
REGREAD_FAILED
REGSAVE_FAILED
SG_NOT_CONNECTED
UPDATE_RUNNING
UPDATE_NOT_RUNNING
UNIT_CLOSED
UNKNOWN_USER
UPLOAD_RUNNING
104
*
Internal error. Failed to upload event categories.
Internal error. Data received to non-existing RAS unit.
Internal error. No Remote Access Client unit to send data
to. Try to restart the Remote Access Client service.
The connection is configured to be read-only, so all OPC
writes, History logs update and alarm acknowledge are
prohibited.
*
Failed to read the connect account or password
information from the registry.
*
Failed to save the connect account or password
information to the registry. Check that you are local
administrator on the current node.
No service group associated with the remote system
connection object. This can be possibly be corrected
through the consistency checker/auto correction function.
A new update operation can not be started as one is
already being performed by the Remote Access Client.
Abort can be used to terminate the running upload.
Internal error. An update operation was attempted by a
Remote Access Client protocol object but no upload was
in progress.
Internal error. Unit was closed.
The remote user account is not recognized by the
Remote Access Server. If common Windows domain is
used, check that the user is present in the provider
system. If user mapping is used, check the user mapping
table on the Remote Access Server, service group.
An upload is already running. Wait until it terminates
before a new upload is started.
Appendix A Error Messages
Description
3BSE037076-510 D