ABB 800xA User Manual page 68

HTTPS Communication Protocol
3.
For information on generating certificate request, installing the certificate, and
renewing the certificate, refer to the Microsoft Internet Information Server
documentation.
IIS Site Bindings
After installing the SSL certificate, the HTTPS binding must be added to the
Internet Information Server running on the AOWebServerNode to allow the
HTTPS communication in the Provider system.
Execute the following to configure the HTTPS binding using the SSL certificate
with the CN WD-03-AO:
1.
2.
3.
4.
Figure 43. Changing the values in Bindings
5.
68
The recommendation for RSA Key Size is 1024 bits.
Open the Internet Information Services (IIS) Manager on the
AOWebserverNode in the Provider system.
Select Sites > Default Web Site.
Click Bindings in Actions > Edit Site.
Click Add and select Type as https and enter the Port as 443. See
The SSL certificate lists the installed SSL certificates. Select the certificate
that is installed to be used for securing AO communication.
Click OK to save the changes, and then click Close.
Section 3 Configuration
Figure 43.
3BSE037076-510 D