Password Configuration
The wildcard character '*' can be used instead of a Windows account name in the
subscriber system. Use this method only to map to a read-only or Guest user in the
provider system, since it opens up a system for write from all accounts in the
subscriber system.
The Security Report in the provider system is extended with a part that documents
the user mapping for the Remote Access Server.
Password Configuration
It is recommended to configure a password for the Remote Access Server.
The selected password must also be given when the Remote Access Client is
configured. See section
To configure the password, click the Set Password button.
Setting a password is highly recommended but not mandatory. A password check
is not made during a client-server connection. Clients can connect to the server
without a password.
Figure 12. Set Password Dialog Box
Remote Access Server Advanced Configuration
There are two more configurations possible for the Remote Access Server.
They are configured directly in the Special Configuration tab on the Service Group
object.
These configurations are:
32
Remote Access Client Advanced Configuration
Section 3 Configuration
on page 38.
3BSE037076-510 D