ABB 800xA User Manual page 101

Appendix A Error Messages
Table 8. 800xA Multisystem Integration Error Messages (Continued)
Error Messages
FILE_FORMAT
FILE_VERSION
HDA_BAD_HANDLE
HDA_BAD_ITEMID
HDA_NOT_INITED
HDA_REFERENCE_NOT_FOUND
INITED
ID_USED
ID_IN_USE
INVALID_SECTION
MANAGED_READONLY
NODE_ADMIN_ERROR
NO_CONNECTION
3BSE037076-510 D
File format error in Remote Access Client service data.
This may happen if a newer version of the Multisystem
Integration function is installed and will require a full new
upload to get correct data.
File version error in Remote Access Client service data.
This may happen if a newer version of the Multisystem
Integration function is installed and will require a full new
upload to get correct data.
Internal error. History server encountered a bad
(unknown) handle.
Internal error. History server address with malformed item
identifier.
Internal error. History server linked adaptor not initialized
before use.
*
A referenced aspect in a history log configuration is not
found in the provider.
Internal error. Object is re-initialized after first use.
The user mapping is already used.
Internal error. Identifier already in use.
*
A section is uploaded through a reference without being
explicitly uploaded. Upload the section before any objects
referencing the section.
Internal error. A read-only property table was the target
for an update.
*
Internal error. Handling of the pseudo nodes representing
the remote system failed.
Currently no connection open to the provider system.
Check the connection status to pinpoint the problem.
Description
101