Table of Contents
Advertisement
Section 3 Configuration
Upload Configuration
Before any objects in the provider system can be used in the subscriber system,
proxy objects for the remote objects must be created in the subscriber system.
This is done through an upload operation. Refer to the System 800xA, Tools
(2PAA101888*) instruction for details.
Before the upload operation can start, you must specify what part of the provider
system that should be uploaded. This configuration is done in the Upload
Configuration tab of the Remote System object. Select the System Connection
aspect of the previously created Remote System object. Click Upload Configuration
tab.
Figure 22. System Connection Aspect, Upload Configuration Aspect
If an upload is done, this view shows the number of children for this entry in the
provider and subscriber system. If the count differs, the systems are not in sync and
a new upload is needed. If the communication towards the provider is down
<No data> is shown.
To add a new object or structure from the provider, click the Add button.
Try to limit the upload to the objects needed to supervise and operate the provider
system only.
3BSE037076-510 D
Upload Configuration
41
Hide quick links:
Advertisement
Table of Contents
