ABB 800xA User Manual page 103

Appendix A Error Messages
Table 8. 800xA Multisystem Integration Error Messages (Continued)
Error Messages
NOHOST
NOT_INITED
NOT_INITIALIZED
NOT_COMPLETE_SECTION
OBJECTID_IN_USE
OBJECT_NOT_LOCKED
PERMISSION_MISSING
PROTOCOL_NOT_FOUND
PROTOCOL_VERSION
PORT_IN_USE
3BSE037076-510 D
No valid host definition for Remote Access Client. Check
the configuration of the Remote Access client.
Internal error. Object used without being initialized.
Internal error. Object not initialized before use.
*
Tried to upload a subsection without uploading the top
section. Can be caused by a reference to a subsection
before the top section is uploaded.
Internal error. Object identifier was already used by
another object. Try to upload all proxy objects again to
regain internal table consistency.
*
The object to write to is not locked by the current user.
*
A permission used in a section definition do not exist in
the subscriber system. Use Import/Export to move the
permission from the provider to the subscriber.
One of the protocols used to communicate between the
Remote Access Server and Remote Access Client can
not be found. This may if different versions of the
Multisystem Integration function is installed in the
subscriber and provider or if some DLL-s are lost on the
Remote Access Server/Client side. Re-install the 800xA
to correct the problem.
The version of one of the protocols used by the Remote
Access Server and Remote Access Client to
communicate do not match. Install the same version of
800xA Multisystem Integration on both provider and
subscriber to correct this problem.
The port selected for the Remote Access Server or Client
is already in use by another application. Can only be
solved by removing the other application or selecting
another port to use.
Description
103