Mitsubishi Electric MELSEC IQ-R series Reference Manual page 332

• Batch modify file information (subcommand: 0002)
ASCII
Subcommand
Attribute
(Before modification)
File size
Binary
Setting
Subcommand
flag
Attribute
Modification
(Before
pattern
modification)
File size Fixed
value
■Response data
There is no response data for this command.
An error occurs If one of the following files is specified while the QnACPU is in RUN, and error end code will
be returned.
• Parameter file
• Currently executing file in the built-in RAM (drive name: 00H)
15 QnACPU DEDICATED COMMANDS
330
15.3 File Control
Keyword Setting flag Drive name
File name
Modification pattern
(After modification)
Fixed value
Drive
Keyword File No.
name
modification)
File name Extension Attribute
(After (After (After
modification) modification) modification)
File No.
Attribute
Extension
(After modification)
(After modification)
Extension
File name
(Before
(Before
modification)
Last edit Last edit
time date
File name Extension
(Before modification) (After modification)
Last edit time
Last edit date