Mitsubishi Electric MELSEC IQ-R series Reference Manual page 272

Data specified by request data
■Command
ASCII code
0 6 3 0
30 36 33 30
H H H H
■Subcommand
ASCII code
0 0 0 0
30 30 30 30
H H H H
■Cycle time units, cycle time
Specify the following time interval (period for 1 cycle). (Page 266 Cycle time)
• Time interval that C24 reads monitoring information from CPU module
• Transmission interval of monitoring result when 'fixed cycle send' is specified with the Programmable controller CPU
monitoring function
The time unit (100 ms/1 second/1 minute) can be selected. (Page 266 Cycle time units)
■Programmable controller CPU monitoring function
Specify the send timing (fixed cycle send/condition match send) of the monitoring result. (Page 266 Programmable
controller CPU monitoring function)
■Transmission method
Fixed '0'.
ASCII code
0 0
30 30
H H
■Number of registered word blocks, number of registered bit blocks
Specify the number of blocks of word device registration and bit device registration. (Page 73 Number of blocks)
■CPU error monitoring, CPU error monitoring registration
Specify whether to perform error monitoring (status monitoring) of host station CPU module together. (Page 267 CPU
error monitoring, CPU status information)
• When do not perform CPU error monitoring (0): CPU error monitoring registration is not required.
• When perform CPU error monitoring (1): Register the following fixed values to CPU error monitoring registration.
ASCII code
0 1 0 0 0
30 31 30 30 30
H H H H H
13 SERIAL COMMUNICATION MODULE DEDICATED COMMANDS
270
13.5 Programmable controller CPU monitoring function
Binary code
30
H
Binary code
00
H
Binary code
00
H
0 0 0 0 0 0 1
30 30 30 30 30 31
30
H H H H H H
H
06
H
00
H
0 0 0 5 0 0 0
30 30 30 35 30 30 30
H H H H H H H
Binary code
1
00 00 00 01 01
31 H H H H
H
00 05 00 01 00
H H H H H H