ABB 800xA Operation page 90

Enhanced Control Loop Monitoring Mode (Licensed mode)
•
•
In addition to the above tabs, an application engineer sees two more tabs. They are:
•
•
Figure 48. Typical Faceplate view in Operator's mode (licensed)
Control Loop Asset Monitor Results
The Control Loop Asset Monitor information is consolidated in the CLAM
faceplate Aspect. To access the faceplate:
•
•
•
•
The faceplate has multiple tabs with access to the most important aspects for
reviewing results or entering configuration. Some of the tabs are:
90
Loop performance details
Trend
Controller configuration
Loop configuration
Open a Plant Explorer Workplace.
Use Structure Selector to open Control Structure.
Use Object Browser to navigate and select the Control Loop Asset Monitor of
interest.
Select CLAM Faceplate in the Aspect List Area to launch the CLAM
Faceplate in the Preview Area.
Section 8 Control Loop Asset Monitor
3BUA000150-600