ABB 800xA Operation page 134

HXAM_G_Faceplate
•
134
– Limit Reached: Gives the subcondition for the HD_Hot_Operating_Point
condition. The different subconditions that will be reported during
Monitoring are:
Normal:
High:
Low:
– HD Hot: Gives the value of HD Hot for the current OPS.
HD Cold Monitor:
– Status: Gives the status of the HD Cold Monitor. The status values are:
Enabled:
Not Enabled:
Stale Data in Trained Set: If one or more BOPS is stale.
Not Available:
Data Unavailable:
– Limit Reached: Gives the subcondition for the
HD_Cold_Operating_Point condition. The different subconditions that
will be reported during Monitoring are:
Normal:
High:
Low:
– HD Cold: Gives the value of HD Cold for the current OPS.
Section 9 Heat Exchanger Asset Monitor (HXAM)
HD Hot is within the Normal range.
HD Hot has crossed the HD_Hot_High
Limit.
HD Hot has crossed the
HD_Hot_Low Limit.
If HD Cold Monitor is enabled.
If HD Cold Monitor is not enabled.
During Training.
If HD Cold Monitor is enabled,
but HD Cold data is not available.
HD Cold is within the Normal range.
HD Cold has crossed the
HD_Cold _High Limit.
HD Cold has crossed the
HD_Cold_Low Limit.
3BUA000150-600