ABB 800xA Operation page 177

Section 9 Heat Exchanger Asset Monitor (HXAM)
1.
2.
3.
4.
5.
Heading
Time Stamp
Execution Time (ms)
Phase Of Operation
BOPS
T Hot In
T Hot Out
T Cold In
T Cold Out
Mass Flow Hot
Volume Flow Hot
Mass Flow Cold
Volume Flow Cold
P Hot In
3BUA000150-600
Description of what data the file contains.
Date and time when the file was created.
Date and time when logging started.
All the Asset Parameters (With heading Asset Parameter Name and
Parameter Value).
All the Process Data, Calculated Data, and ACDs in the order shown in
Table 11 (Heading is also provided).
Table 11. Log File Headings and Explanations
The current time in local time standard when the Asset
Monitor started execution.
The total time the Asset Monitor takes to execute logic in
milliseconds, rounded to one decimal.
Tells if the Asset Monitor is In Training or Monitoring.
During Training, it specifies if an OPS has been accepted as
a BOPS. If it is a BOPS, then it specifies if it is the first,
second, etc. During monitoring the BOPS used for
comparison with the COPS is logged.
Hot Side Inlet Temperature
Hot Side Outlet Temperature
Cold Side Inlet Temperature
Cold Side Outlet Temperature
Hot Side Mass Flow
Cold Side Volume Flow
Hot Side Mass Flow
Cold Side Volume Flow
Hot Side Inlet Pressure
Log File Description (.csv file)
Explanation
177