Section 10 Asset Optimization Reporting; Introduction - ABB 800xA Operation

Section 10 Asset Optimization Reporting

Introduction

The 800xA System provides two Asset Optimization Report Templates that
summarize important maintenance information to provide maintenance engineers
with comprehensive data to make decisions. The Asset Optimization Report
Templates are:
•
•
These reports are implemented as a Microsoft Excel (.xls) files. The templates are
used in conjunction with the Inform IT Scheduler system extension. Reports are run
manually and can be scheduled periodically as defined in the Scheduling Definition
Aspect. Report data is retrieved through DataDirect macros or by using custom
macros written in Visual BASIC. All report parameters are defined in a second
configuration sheet. When data is collected and formatted, the reports can be
optionally printed or historized, if Information Management is installed and
appropriately configured.
The Asset Optimization Report Template implementation requires that the
following 800xA System features be installed on the target Aspect System:
•
•
•
•
Refer to System 800xA Asset Optimization Configuration (3BUA000118*) for
information on setting up and configuring reports.
3BUA000150-600
AO Asset Condition History
AO Running Time Report.
Asset Optimization: required as a source for the report data.
Scheduler: required for the report template to be triggered, run, and stored.
DataDirect (Excel add-in): required for retrieving data from the Aspect System.
Information Management: required if long term archiving of reports is
required.
Report.
181