Running The Control Loop Asset Monitor; Basic Loop Monitoring Mode (Unlicensed) - ABB 800xA Operation

Electrical control system, a safety system and a collaboration enabler
Hide thumbs Also See for 800xA:
Table of Contents

Advertisement

Running the Control Loop Asset Monitor

Before performing operational activities related to Control Loop Asset Monitors,
consider the following:
CLAM AO Server Runtime Statistics will not be available while CLAM is under
execution.
Running the Control Loop Asset Monitor
Starting the AO Server will start running all loaded Control Loop Asset Monitors.
CLAM logic operates in the modes:

Basic Loop Monitoring Mode (Unlicensed)

The CLAM logic uses history services of 800xA System to read PV, SP and CO
inputs from log configuration continuously. The Log configuration is necessary for
82
The AO Servers should have been configured as part of post installation
process. If they have not been configured, refer to the Asset Optimization
section in System 800xA Post Installation (3BUA000156*).
The Control Loop Asset Monitor configurations should have been loaded into
the AO Server as part of configuration process. If they have not been loaded,
refer to System 800xA Asset Optimization Configuration (3BUA000118*).
AO Server requires a minimum of three seconds to properly execute each Asset
Monitor. The default execution time is 8 hours. The Logic Execution Interval
should have been set as part of configuration process. If it has not been set,
refer to System 800xA Asset Optimization Configuration (3BUA000118*).
When AO Server is not running, the Asset Monitor displays idle state of all
Control Loop Asset Monitors.
If something is wrong or missing, AO Server displays appropriate error
messages. Take necessary corrective action to clear error message. After taking
corrective action, it may be necessary to reload Control Loop Asset Monitors
or stop and restart AO Server.
Runtime statistics can be used to review and troubleshoot the overall Asset
Monitor execution details.
Basic Loop Monitoring mode (Unlicensed).
Enhanced Control Loop Monitoring mode (Licensed).
Section 8 Control Loop Asset Monitor (CLAM)
3BUA000150-600

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents