Asset Monitor Properties - ABB 800xA Operation

Asset Monitor Properties

5.
6.
Asset Monitor Properties
Each instance object containing at least one Asset Monitor Aspect will also contain
one AssetMonitorProperties Control Connection Sspect. This Aspect publishes the
current asset conditions generated by Asset Monitors configured in the object. The
elements of an asset condition are exposed as a set of OPC items and related
attributes.
The property names follow one of the following conventions:
•
•
•
40
– FR State: The state of the Fault Report at any instance in time. It can
either be the current condition, or the Most Severe Unacknowledged
(MSU) condition of the asset. If the alarm line corresponding to the
condition is not acknowledged, the Fault Report Viewer keeps the MSU
even when the condition goes back to normal, in which case the FR State
column reads Most Severe Unacknowledged. If the MSU is the current
condition, then the FR State column reads Current.
– AM Name: the name of the Asset Monitor reporting the condition.
– Condition: a description of the condition that generated the Fault Report.
– Subcondition: a description of the condition that generated the Fault
Report.
– Message: Descriptive text.
To submit a Fault Report to the CMMS, right-click anywhere in the desired row
and select Submit from the context menu. Refer to
on page 53.
To dismiss the Fault Report and acknowledge the alarm line, select Dismiss in
the context menu.
<Asset Monitor Aspect Name>.<Attribute Name>
<Asset Monitor Aspect Name>.<Condition Name>.<Attribute Name>
<Asset Monitor Aspect Name>.OutputRecords.< OutputRecord
Name>.<Attribute Name>
Section 3 Condition Reporting and Monitoring
Submitting Fault Reports
3BUA000150-600