Section 9 Heat Exchanger Asset Monitor (HXAM)
Any error in configuration will set the Quality Status to
badConfigurationError
Quality Status to
show an error message.
A normal working Asset Monitor without any errors will appear similar to the one
shown in
Figure 58. HXAM_G Aspect when HXAM-G Asset Monitor is Working Normally
HXAM_G_Faceplate
A detailed view of the Asset Monitor can be seen from the HXAM_G_Faceplate
(Figure
detailed picture of the condition being assessed.
Performance Tab
The Performance tab
condition being assessed. This tab is the view of HXAM_G_Performance_FE
Aspect.
The fields in the Performance tab are:
•
3BUA000150-600
. In either case the Asset Monitor will stop executing and will
bad
Figure
58.
59). The HXAM_G_Faceplate has eight tabs, with each tab showing a
(Figure
Quality Status: Gives the working status of the Asset Monitor. The following
are the different status values:
and any other error during execution will set the
59) shows the details of the Performance_Factor
HXAM_G_Faceplate
TC08479A
121