ABB 800xA Operation page 175

Section 9 Heat Exchanger Asset Monitor (HXAM)
The data for these properties are read from the AssetMonitorProperties Aspect,
which is populated by the Asset Monitoring Engine. The view of the Log
Configuration Aspect is shown in
viewed by selecting the Status tab and clicking Read. A value of
Asset Monitoring Server is not running or the Asset Monitor Status Quality is not
good or not goodlocaloverride. Every time the Asset Monitoring Server is started
or restarted, the property will take a value of
The green light (circle in lower left of the display) indicates that logging is
working correctly. If it is not green, it means that the History Source is not
configured properly.
Figure 81. Log Configuration Aspect
3BUA000150-600
Figure 81. The logged data for a property can be
first and then the current value.
0
Log Configuration
shows that the
-1
TC08476A
175