ABB 800xA Operation page 28

Asset Viewer
automatically when values change. Web-enabled views require a manual refresh to
update the view.
The Asset Viewer Aspect, when added to an object, allows the Asset Tree to be
displayed. Asset Tree severity indicators propagate the most severe condition up the
Asset Tree. The indicators distinguish the level of severity using OPC and Asset
Monitor severity range (1 to 1000).
The Asset Viewer supports two sets of the icons as described in
The Namur Icon severity indicators are shown in
the existing icons instead of Namur icons, should make configuration changes to
revert to the existing icons. To know more on how to change, refer to
Existing Icons and Colors
(3BUA000118*).
Table 1
severities, and Maintenance Alarm definitions
Icon Severity
None
Blank
Low:
1 to 100
Low:
101 to 250
Medium:
251 to 500
28
shows and describes the Asset Tree severity indicator icons, their related
Table 1. Asset Tree Severity Indicator Icons (Old Icons)
None: No Asset Reporter or Asset Monitor associated with the asset,
Asset Monitor is disabled or has never been downloaded, or Asset Monitor
has never run for this object.
Normal: No maintenance required.
Maintenance required: Maintenance required soon to avoid functional
restrictions, e.g. caused by a nearly exhausted wear reserve or
operational conditions.
Maintenance required: Maintenance required now to avoid functional
restrictions, e.g. caused by an exhausted wear reserve or operational
conditions.
Out of specification: Asset is operating outside specified limits, caused
by internal problems or process characteristics.
Section 3 Condition Reporting and Monitoring
in System 800xA Asset Optimization Configuration
Maintenance Alarm Definition
Table 1
Table 2. Users who prefer to use
Restore
1
3BUA000150-600
and Table 2.