ABB 800xA Operation page 154

HXAM_ST_Faceplate
Heat Transfer Tab
The Heat Transfer tab
Heat_Transfer_Performance condition being assessed. This tab is a view of the
HXAM_ST_Heat_Transfer_FE Aspect.
Figure 70. Heat Transfer Tab
The fields in the Heat Transfer tab are:
•
•
154
(Figure
Quality Status: Gives the working status of the Asset Monitor. The following
are the different status values:
– BadOutOfService: Asset Monitoring Server Engine is shut down.
– Good: Asset Monitor is running smoothly.
– Bad: Asset Monitor has encountered some error.
– BadConfigurationError: Configuration error in Asset Monitor.
– GoodLocalOverride: Asset Monitor is under Training/Asset Monitor is
in Monitoring Phase but there is no BOPS recorded/one or more BOPS
has gone stale.
Working Status: Tells if the Asset Monitor is
Phase.
Monitoring
Section 9 Heat Exchanger Asset Monitor (HXAM)
70) shows the details of the
TC08465A
In Training
or is in
3BUA000150-600