Block Setting - Mitsubishi Electric AG-150A Instruction Book

(2) Touch the Interlocked indoor unit button to bring up the interlocked indoor unit selection window, and touch the number assigned to
the unit to register. An orange frame will appear around the selected items. Click again to deselect the selected items. Click again to
deselect the selected item (no orange frame). Press the [OK] button to save the changes, or touch the [Cancel] button to go back to
the previous screen without saving any changes.
Note: A maximum of 16 indoor units can be registered to operate with one ventilator.
(3) Press the [Save setting] on the LOSSNAY interlock setting window to save the settings.

5-8 Block Setting

To perform a batch monitoring/control of multiple air conditioning unit groups, the groups need to be registered to a block. Touch [Blocks]
on the window that appears when [Initial Settings] on the menu bar in the setting change window to register groups to a block.
* Although not shown on the LCD, blocks are used as a unit of control for energy-saving and peak-cut control.
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Note: If the system is connected to the TG-2000A, make all settings and changes from the TG-2000A so that the data in TG-2000A and
AG-150A will match.
Block No.
Block name button
Group button
5-8-1 Setting a block name
Touch the block name button, and enter the block name on the keyboard that appears in 20 characters or less.
Press [Save setting] on the block setting window to save the settings.
Note: The following characters cannot be used in the group name: < > & " '
– 40 –
Save Settings