Mitsubishi Electric AG-150A Instruction Book page 24

(5) Save the contents of schedule
4-3-2 Setting the schedule with a registered license
When a license is registered, it is possible to set different weekly (2 types)/annual/today's schedules for each air conditioner group.
Moreover, for any weekly/annual/today's schedule run for a particular day, the priority in which it is run will be from the highest and the
order will be [Today's], [Annual], [Weekly]. Two types of weekly schedule (Summer/Winter) can be set.
4-3-2-1 Setting the Weekly Schedule
Touch the menu item [Schedule Settings] and touch [Weekly1] or [weekly2] in the sub menu to display the Weekly Schedule setting
screen. To set a weekly schedule, you first must select what will be the target of this schedule and then set the schedule details from
Sunday right through to Saturday.
Note: When the contents of an operation are executed as part of a schedule these contents will continue to be in effect until they are
changed by a schedule or browser etc. Therefore, if you are setting a schedule that is only for a particular day, be sure to set
your schedule in a way that will not impact on the next day's operation.
For example, if you wish to prohibit operations being performed from the remote controller after 17:00, set a Prohibit operation
for 17:00 and set an Enable operation for 23:59.
(1) Select the schedule to set.
(2) Select the type of schedule settings to make.
Select the type of schedule settings to make by referring to Section 1 above under "Select the type of schedule settings to
make."
(3) Select the day of the week
Schedule content button
After all the settings have been made, touch the [OK] button to save
the schedule settings.
Touch the [Cancel] button to go back to the previously saved settings
without making any changes.
Select either [Weekly 1] or [Weekly 2] from the sub menu. (Two types
of weekly schedule patterns are available if the license is registered.)
Select the days of a week from the weekly schedule screen and touch
the schedule content button to bring up the schedule content setting
screen.
– 22 –