Mitsubishi Electric AG-150A Instruction Book page 20

(3) Hot water supply equipment group
Temperature
Remote operation
prohibit switch
Function
1 ON/OFF Select the operation
status (ON or OFF).
2 MODE Select the desired
operation mode from
one of the icons below
"Mode".
3 Set Temperature Set the temperature by
using the Up/Down
arrows below "Set
Temp".
4 Remote Prohibit Press the button that
controller corresponds to each of
the following buttons to
permit or prohibit access
to these functions: ON/
OFF, operation mode,
temperature, and
circulating water
replacement.
5 Circulating water Press the OK button with
replacement the circulating water
sign reset replacement sign reset
button being touched.
6 OK Press the OK button to
reflect the change.
7 Cancel Press the Cancel button
to cancel the change.
ON/OFF switch
Circulating water
replacement sign reset
Operation method
An orange frame will appear around the selected button.
An orange frame will appear around the selected mode.
Pressing the Up/Down arrow increases/decreases the temperature by one degree
respectively.
The settable temperature range depends on the mode and model. If the Up arrow is
touched when the upper limit temperature is displayed.
The lower limit temperature will appear, and the Down arrow vice versa.
• Heating mode:
• Heating ECO mode:
• Hot Water mode:
• Anti- freeze mode:
• Cooling mode:
* Temperatures are displayed Fahrenheit if Fahrenheit is selected.
Pressing of each button toggles through the following three options:
Retention of current status → Permit → Prohibit
Operation mode
Circulating water
The circulating water replacement sign is reset.
Pressing the OK button saves the setting and takes the screen back to the previous
screen (Floor layout or Block display).
Pressing the Cancel button cancels the change and takes the screen back to the
previous screen (Floor layout or Block display).
30°C ~ 45°C
30°C ~ 45°C
30°C ~ 70°C
10°C ~ 45°C
10°C ~ 30°C
Retention of
current status
ON/OFF
Temperature
setting
replacement
– 18 –
Operation mode switch
OK
Display
Permit
Cancel
Prohibit