Operation Condition Monitor - Mitsubishi Electric AG-150A Instruction Book

4-1 Operation condition monitor

• This function displays the ON/OFF/Malfunction status of specific units or group.
Floor-switching button
Zoom-out button
(1) Operation method
• Note that operation methods are different for group operation and block operation.
<Group display (icon)>
Zoom-out button
<Group display (simplified icons)>
Zoom-in button
The operation (ON/OFF) and error status of the air conditioning units
can be checked with the icons on the screen.
(
* If there is a device that cannot be identified,
icon of the device.
• Click on the icon of a group, and then click "Operate" to go into the
screen that allows the operation of that group. On the screen,
detailed information about the temperature, fan speed, air flow
direction, prohibit/permit status of the remote controller, and mode
can be checked. (If air conditioning unit group, ventilation
equipment (LOSSNAY) group, general equipment group, and Hot
Water Supply group are included in the selected group, a screen will
appear, asking the user to select a group. Once the selection is
made, an operation screen will appear.)
• Pressing the Zoom-out button takes the screen back to the screen
with simplified icons.
• By pressing the floor switching button, air conditioning units on
other floors can be checked.
(Several types of icons will appear.)
The operation (ON/OFF) and error status of the air conditioning units
can be checked with the icons on the screen.
• Pressing the Zoom-in button will take the screen back to the screen
with simplified icons.
• By pressing the floor switching button, air conditioning units on
other floors can be checked.
– 13 –
Group icon
Operation button
will appear over the