Scanning Two-Sided Originals
You can set the machine to automatically turn over two-sided originals placed in the
feeder, so that each side is scanned separately.
IMPORTANT
• This mode is available only when the machine is equipped with the feeder (optional for
the imageRUNNER 2545/2535/2530/2525/2520).
• When you are scanning originals with a horizontal (landscape) orientation, such as
A4R, make sure to place them horizontally in the feeder. If these originals are placed
vertically, the back sides of these originals are scanned upside down.
1
Press
specify the destination.
NOTE
• For instructions on how to place your originals, see Chapter 2, "Basic Operations," in
the Reference Guide.
• For instructions on how to specify the destination, see "Basic Sending Methods," on
p. 2-2, or Chapter 4, "Specifying Destinations Easily and Quickly."
2
Press [Scan Settings] ➞ select [Option].
For help, see step 2 in "Specifying the Document Size," on p. 3-6.
3
(SEND) ➞ place your originals into the feeder ➞
Press [2-Sided Original].
Scanning Two-Sided Originals
3
3-13