Canon ImageRUNNER 2545i Sending And Facsimile Manual page 292

Hide thumbs Also See for ImageRUNNER 2545i:
Table of Contents

Advertisement

Cause 2
The network is down (the server is unable to connect to the network or was
disconnected).
Remedy
Check the network status.
# 0752
Cause 1
The SMTP server name and e-mail address are incorrect.
Remedy
Check that SMTP Server and E-mail Address in E-mail/I-Fax are set correctly.
(See Chapter 3, "Setting up the Machine for Your Network Environment," in the
System Settings Guide.)
Cause 2
The domain name is incorrect.
Remedy
Check that Domain Name in DNS Host Name/Domain Name Settings is set
correctly. (See Chapter 3, "Setting up the Machine for Your Network
Environment," in the System Settings Guide.)
Cause 3
The SMTP server is not functioning.
Remedy
Check that the SMTP server is operating properly.
Cause 4
The network is down.
Remedy
Check the network status.
# 0753
Cause
A TCP/IP error occurred while sending an e-mail. (Socket, Select error, etc.)
Remedy
Check that the network cable is properly connected between the machine and
your computer. If the machine still does not operate normally, turn the main
power OFF and then back ON.
# 0755
Cause 1
Jobs cannot be sent because TCP/IP is not functioning correctly.
Remedy
Check that TCP/IP Settings in Network Settings is set correctly. (See Chapter 2,
"Connecting the Machine to a TCP/IP Network," in the System Settings Guide.)
Cause 2
The IP address is not set.
Remedy
Check that TCP/IP Settings in Network Settings is set correctly. (See Chapter 2,
"Connecting the Machine to a TCP/IP Network," in the System Settings Guide.)
Self-diagnostic Display
9
9-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents