Self-Diagnostic Display; Error Messages - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Self-diagnostic Display

The machine displays simple messages and codes that help you understand what
is happening in the machine. Use these messages and codes to identify the actions
you need to take to solve problems, when necessary.

Error Messages

If the machine displays an error message, follow the instructions on the touch panel
display.
Cannot complete searching due to timeout. Check the settings.
Cause 1
Remedy
Cause 2
Remedy
9
Cause 3
Remedy
Cannot connect to the selected server. Check the settings.
Cause
Remedy 1 Check the gateway address setting. (See Chapter 2, "Connecting the Machine
Remedy 2 Check the server address and port number for the LDAP server. (See Chapter
Remedy 3 Check that the LDAP server is operating properly.
9-6

Self-diagnostic Display

The machine could not search for destinations within the specified time.
Increase the time setting for Search Timeout in Register LDAP Server. (See
Chapter 3, "Setting up the Machine for Your Network Environment," in the
System Settings Guide.)
The machine could not authenticate a user against an authentication server and
retrieve attributes about the user from the server within the specified time.
Increase the time setting for <Timeout Settings> on the Send Function
Authentication Settings page. (See Chapter 4, "Customizing Settings," in the
Remote UI Guide.)
An error occurred on the LDAP server side.
Check that the LDAP server is functioning normally.
The machine cannot connect to the specified IP address/port.
to a TCP/IP Network," in the System Settings Guide.)
3, "Setting up the Machine for Your Network Environment," in the System
Settings Guide, or Chapter 4, "Customizing Settings," in the Remote UI Guide.)