Manual Sending - Canon ImageRUNNER 2545i Sending And Facsimile Manual

IMPORTANT
• The machine automatically detects the size of the original when scanning it. For the
size of the original the machine can detect, see Chapter 2, "Basic Operations," in the
Reference Guide.
• If the machine cannot detect the size of the original correctly, the Original Size screen
appears when you press
[OK].

Manual Sending

The following describes the flow of sending faxes using the Manual Sending mode.
IMPORTANT
If you cancel the Manual Sending mode during transmission, the pages that have
already been scanned are sent. You can check how many pages have been sent to
the destination by printing the communication reports or using the System Monitor
screen. (See "Printing Communication Reports," on p. 8-9, or "Checking/Printing
Communication Log," on p. 6-9.)
1
(SEND) ➞ place your originals.
Press
IMPORTANT
You can only send one page at a time when you place your original on the platen
glass. If you want to send a document of two or more pages, place your originals into
the feeder.
NOTE
• For instructions on how to place your originals, see Chapter 2, "Basic Operations," in
the Reference Guide.
• If <Enter your User Name and password and specify the login destination.> appears,
follow the instructions in "Logging in to Authorized Send," on p. 2-35.
• If any of the messages below appears, follow the instructions in Chapter 2, "Basic
Operations," in the Reference Guide:
- <Enter the Department ID and Password using the numeric keys.>
- <You must insert a control card.>
- <Enter the User ID and Password.>
(Start). Specify the size of the original manually ➞ press
Basic Sending Methods
2
2-31