Canon ImageRUNNER 2545i Sending And Facsimile Manual page 78

4
NOTE
• The pause time differs in length, depending on whether it is entered in the middle or at
the end of a fax number.
- The pause time entered in the middle of a fax number (lower-case p) is set to four
seconds long by default. This can be changed to any length between 1 and 15
seconds. (See "Adjusting the Pause Time," on p. 7-25.)
- The pause time entered at the end of a fax number (upper-case P) is set to 10
seconds long. (This length cannot be changed.)
• Two or more pauses can be entered consecutively.
• Enter the pause time equivalent in length to the time required for the outside line dial
tone to be heard after the outside line access number is called.
5
6
Press [Pause].
Enter the fax number (up to 120
characters) using
(numeric keys).
Press [OK].
The specified destination appears on the
top screen.
Advanced Sending Methods
2
-
2-51