Canon ImageRUNNER 2545i Sending And Facsimile Manual page 87

IMPORTANT
• If you select [Color] as the color mode, you can select [100 × 100 dpi], [150 × 150 dpi],
3
[200 × 200 dpi], or [300 × 300 dpi] as the available resolution.
• If you select [PDF (Compact)] or [PDF (Compact+OCR)] as the file format, the
resolution is set to [300 × 300 dpi] automatically. You cannot select the resolution
other than [300 × 300 dpi] for [PDF (Compact)] or [PDF (Compact+OCR)].
• If you are sending documents via I-fax, you can select [200 × 100 dpi], [200 × 200 dpi],
[200 × 400 dpi], [300 × 300 dpi], [400 × 400 dpi], or [600 × 600 dpi] as the available
resolution.
• If you are sending documents via fax, you can select [200 × 100 dpi], [200 × 200 dpi],
[200 × 400 dpi], or [400 × 400 dpi] as the available resolution.
• The maximum size of an image that you can send at a resolution of 600 × 600 dpi is
A3. If the image exceeds this size, it may be cut off.
• If you send a long original at a resolution of 600 × 600 dpi, the periphery of the original
image may cut off slightly.
• If you are sending documents via fax, the maximum size of an image that you can
send at a resolution of 400 × 400 dpi is A3.
3-4
Specifying the Color Mode and Resolution
❑
Press the Resolution drop-down list ➞
select the desired resolution.
If you want to use less memory and
make the sending time shorter, select a
low resolution.
❑
Press [OK].
NOTE
To cancel the specified settings, press
[Cancel] on the Scan Settings screen
or press (Reset).